seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Measuring the play for the reverse gear brake -B1-. > < Planet gears: adjustment work

Leon Mk2

Reverse gear brake -B1-: adjustment
Reverse gear brake -B1-: adjustment
Special tools and workshop equipment required
t  Feeler gauge
   
–  Installing components for reverse gear brake adjustment -B1- in the gearbox casing → Chapter.
1 - Gearbox casing
2 - Circlip
3 - Support disc
4 - Inner disk -B1-
5 - Outer disk -B1-
q   Number of parts → Chapter
6 - Thrust disc
q   Installing for the adjustment
q   Installing with the corresponding thickness after making the measurement
7 - Plate spring
q   Take note of assembly position: large diameters should coincide
8 - Circlip
9 - Spring support plate
q   With springs
10 - Gearbox casing cover
q   With piston -B1-
q   Before removing or fitting the cover, the gear speed sender must be removed -G68- → Fig.
11 - Bolt
q   20 Nm

   
Thrust disc -A- to be determined
–  Installing all components for reverse gear brake adjustment -B1- in the gearbox casing → Chapter
–  Fit the gearbox casing cover.
  N37-0953
–  Tighten the bolts uniformly and in diagonal sequence to a torque of 20 Nm.
  N37-0581
–  Blow compressed air into the pressure duct -arrow-. When the piston compresses the disc package, it must be audible. In the event of no air, the clutch pedal should return to its resting position.
  N37-0591

Measuring the play for the reverse gear brake -B1-. > < Planet gears: adjustment work