The converter has been correctly fitted when the measurement between the joining flange and the contact surface of the converter's guide stem is 18 mm. |
WARNING If the torque converter is incorrectly fitted, in the moment when the gearbox is braced to the engine the drive element of the converter or the ATF pump will be damaged. |
|
Continue by assembling the gearbox, bearing the following in mind: |
WARNING Before and during the tightening of the gearbox/engine flange bolts, repeatedly ensure that the torque converter may be rotated behind the drive plate. If the torque converter may not be rotated, it must be assumed that it is not correctly fitted and that to fully tighten the bolted joints will lead to the destruction of the torque converter drive element or of the ATF pump. |
|
|
|
|