Leon Mk2
| III - Removing and installing freewheel and reverse gear brake -B1- |
| Overview → Chapter |
| Dismantling planetary gearbox → Chapter, |
| Assembling → Chapter. |
| 1 - | Circlip |
| q | For supporting tube -B2-. |
| q | Location: Circlip open ends face freewheel retaining wedge. |
| 2 - | Circlip |
| q | For freewheel. |
| q | Location: Circlip open ends face freewheel retaining wedge. |
| 3 - | Freewheel with -B1- piston |
| q | Before removing freewheel, remove valve body and sealing plug → Chapter. |
| q | Dismantling and assembling → Chapter. |
| 4 - | Dished washer |
| q | Convex side faces towards freewheel. |
| 5 - | Pressure plate -B1- |
| q | Installing with flat side facing discs. |
| q | Replacement parts are allocated according to gearbox code letters. |
| 6 - | Inner disc -B1- |
| q | Quantity of inner discs -B1- → Chapter. |
| q | Before installing place in ATF for 15 minutes. |
| 7 - | Outer disc -B1- |
| q | Quantity of outer discs -B1- → Chapter. |
| 8 - | Shim |
| q | Determining thickness → Chapter „Adjusting reverse gear brake -B1-“. |
| 9 - | Gearbox housing with planet carrier installed |
