Leon Mk2
Removing door window |
Carry out the following work: |
– | Remove rear door trim → General body repairs, interior; Rep. gr.70. |
– | Prise out covers -2 and 4-. |
– | Remove rear trim -5- → Chapter |
– | Lower door window -1- until bolts -6- are accessible in window regulator cut-out -7-. |
Note
The bolts -6- have left-handed threads. |
– | Loosen the screws -6- (without removing) and press the clamping brackets -3- apart. |
– | Pull door window -1- upwards at an angle -arrows a- to vehicle exterior out of window slot. |
Note
If work is not possible due to a malfunction caused by electric window regulator, window regulator motor can be unbolted. Window can then be pushed to required working position. |