Synchronisation and storage of window course |
WARNING Synchronise and store window operation when: |
t
| the ground cable has been disconnected from the battery |
t
| the power window motor connector has been disconnected. |
|
Proceed as described in instructions below to synchronise and store window operation. |
l
| The ground cable must be connected to the battery |
l
| The one-touch up and down functions must operate properly → Owners manual |
–
| Actuate switch in door with window to be synchronised and continue to hold down for 5 seconds after window reaches upper stop. |
–
| Now use same switch to move window to bottom stop and hold down for 5 seconds - until a characteristic “click” is heard. |
–
| Repeat the previous work steps on each vehicle door. |
|
|
|