Leon Mk2
Panorama roof with glass cover: installation overview |
1 - | Glass cover for panorama roof |
q | Removing and installing → Chapter |
q | Adjusting → Chapter |
2 - | Front surface plastic |
q | PC material (polycarbonate) |
q | Glued to the frame of the panoramic roof |
3 - | Fixing screw protection for the roller of the sun blinds |
q | 3.5 Nm |
q | Qty. 2. |
4 - | Protection for the roller of the sun blinds |
q | Removing and installing → Chapter |
5 - | Fixing screws of the brackets / bracket guides of the roller of the sun blind |
q | 3.5 Nm |
q | Qty. 6. |
6 - | Roller for the sun blind |
q | Removing and installing → Chapter |
q | Remove together with the brackets / bracket guides of the roller of the sun blind → Chapter |
q | Adjusting → Chapter |
7 - | Runners and control cables |
q | Removing and installing → Chapter |
8 - | Bolt |
q | Qty. 4. |
q | 3.5 Nm |
9 - | Retainer |
q | Qty. 2. |
10 - | Interior dust guard on side guide |
q | Removing and installing → Chapter |
11 - | Control runner guide |
q | Removing and installing → Chapter |
12 - | Outer bellow trim |
13 - | Seal |
14 - | Left-hand metal guard for control cable |
15 - | Connecting rod support |
q | Removing and installing → Chapter |
16 - | Bolt |
q | Qty. 4. |
q | 3.5 Nm |
17 - | PUR adhesive sealant |
q | Transverse cord cut: |
t | Width = 7 mm |
t | Height = 11 mm |
18 - | Bolt |
q | Qty. 3. |
q | 3.5 Nm |
19 - | Drive motor |
q | Removing and installing → Chapter |
20 - | Right-hand metal guard for control cable |
21 - | Frame for the panorama roof |
q | Removing and installing → Chapter |
22 - | Inner seal |
q | Removing and installing → Chapter |
23 - | Roof frame seal |
24 - | Outer bellow trim |
25 - | Interior dust guard on side guide |
q | Removing and installing → Chapter |
26 - | Front lever |
q | Removing and installing → Chapter |
27 - | Bolts |
q | Qty. 6. |
q | 5.5 Nm |
28 - | Sliding guide |
q | Removing and installing → Chapter |