seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Motor for seat height adjustment: Install > < Removing and installing seat height adjustment motor

Leon Mk2

Motor for seat height adjustment: removing
Motor for seat height adjustment: removing
–  Remove front seat → Chapter.
–  Clamp the seat in the bracket for the seat repair -T20172/5-.
–  Remove trim on sill end (rear) → Chapter.
–  Remove front cover on rocker panel side → Chapter.
   
–  Remove bolts -11-.
–  Unscrew the bolt -13-.
–  Unscrew bolt -15- with washer -16- and remove wiring harness.
–  Disconnect connector from seat longitudinal adjustment motor.
–  Loosen wiring harness from retaining clips -14-.
–  Tilt the front seat backwards.

   
–  Unscrew bolt -1- with nut -2-.
  A72-10119
–  Unscrew both micro-encapsulated bolts -1- and remove electric motor for longitudinal seat adjustment on segment with teeth on seat height adjustment.
  A72-10120

Motor for seat height adjustment: Install > < Removing and installing seat height adjustment motor