seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing drawer mounting > < Removing and installing trim on tunnel side

Leon Mk2

Seat backrest adjustment wheel: Removing and installing
Seat backrest adjustment wheel: Removing and installing
The seat backrest adjustment wheel will be mounted on the following listed seats:
t  Front seats with manual height adjustment
t  Front passenger seat without height adjustment
  Note
Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.
removing
   
–  Turn seat backrest adjustment wheel-1- until a detent can be seen from the rear -arrow A-. Use a torch if necessary.
–  Continue to turn the seat backrest adjustment wheel by 120°.
–  Hook in the assembly tool -3399- and lever it in the direction of -arrow B-.
–  Removing the seat backrest adjustment wheel.
Installation
–  Installation is carried out in reverse order.
  Note
If the seat backrest adjustment wheel is too loose following assembly, it must be renewed.
  A72-10340

Removing and installing drawer mounting > < Removing and installing trim on tunnel side