SEAT Workshop Service and Repair Manuals > Leon Mk2 > Body | Bodywork - Interior fitting work | Trim, noise insulation | Luggage compartment trim | Rear lid bottom trim: Removing and installing

Rear lid bottom trim: Install

Installation is done in reverse order of the removal operations; note the following:

Note

t	If there are still trim clips -1- in the tailgate mounting points, they must be removed and inserted in the trim when installing.

t	Check clips for damage or deformation and renew if necessary.

–	Check that all rubber buffers -5- are fitted in trim.

–	First fit the lower tailgate lining -4- onto the centring pins -2- and -3- and then press on until audible latching occurs.

SEAT Workshop Service and Repair Manuals