Leon Mk2
Assembly overview - bonnet > 05.00 |
1 - | Lid |
q | Adjusting - at hinge, within oversized holes. |
q | After completing fitting or adjustment, perform corrosion protection measures on hinges and bolts. |
q | Gaps and shut lines: → Rep. gr.00. |
2 - | Pop rivet |
3 - | Bonnet stay holder |
4 - | Bolt |
q | Qty. 4 |
q | 21 Nm |
5 - | Hinge |
6 - | Rubber bush |
7 - | Stop buffer |
8 - | Clip |
9 - | Rubber buffer |
10 - | Bonnet stay |
11 - | Plenum chamber seal |
q | Pushed onto flange. |
12 - | Clip |
q | Qty. 15 |
13 - | Cd seal |