Leon Mk2
Assembly overview - bonnet 06.00 > |
1 - | Lid |
q | Adjusting - at hinge, within oversized holes. |
q | After completing fitting or adjustment, perform corrosion protection measures on hinges and bolts. |
q | Gap/shut line dimensions: → Rep. gr.00. |
2 - | Torx screw |
q | Qty. 2 |
q | 7 Nm |
3 - | Retaining bracket |
q | For gas-filled strut. |
4 - | Hexagon bolt |
q | Qty. 4 |
q | 21 Nm |
5 - | Hinge |
6 - | Rubber buffer |
7 - | Stop buffer |
8 - | Gas-filled strut |
q | Removing and installing → Chapter |
q | Releasing gas → Chapter |
9 - | Trim |
10 - | Torx screw |
q | Qty. 2 |
q | 1 Nm |
11 - | Clip |
q | Qty. 15 |
12 - | Cd seal |