Leon Mk2
Assembly overview - bonnet 11.03 > |
1 - | Lid |
q | Adjusting - at hinge, within oversized holes. |
q | After completing fitting or adjustment, perform corrosion protection measures on hinges and bolts. |
q | Gaps and shut lines: → Rep. gr.00. |
2 - | Gas-filled strut |
q | Removing and installing: → Chapter. |
q | Releasing gas: → Chapter. |
3 - | Torx screw |
q | Qty. 4 |
q | 1 Nm |
4 - | Trim |
5 - | Blind rivet nut |
q | Qty. 7 |
6 - | Torx screw |
q | Qty. 7 |
q | 4 Nm |
7 - | Clip |
q | Qty. 15 |
8 - | Cd seal |
q | Secured with clip -7- |
9 - | Rubber buffer |
10 - | Retaining bracket |
q | For gas-filled strut. |
11 - | Hexagon bolt |
q | Qty. 2 |
q | 7 Nm |
12 - | Bolt |
q | Qty. 4 |
q | 21 Nm |
13 - | Hinge |