Leon Mk2
Side trim in the luggage compartment, vehicles with 3 and 5 doors: fitting Assembly overview |
1 - | Spacer cap |
Note
Ensure that the spacer block is glued below the side trim in the luggage compartment. |
2 - | Threaded block |
3 - | Clip |
q | 3 units |
4 - | Rubber buffer |
Note
After remove adjust the rubber buffer so that the backrest does not have any play in relation to the body. |
5 - | Handle socket |
q | 3 Nm |
6 - | Luggage compartment side trim |
q | removing and fitting → Chapter |
7 - | Fastening hooks |
q | With integrated screw |
q | Tightening torque: 23 Nm |
q | 2 units |
q | Depending on version see → Spare parts catalogue |