Leon Mk2
General assembly overview |
– | Always replace the door hinge bolts once loosened |
Note
The instrument panel must be moved to allow removal and adjustment of the upper hinge of the door |
1 - | Door |
q | Removing and installing → Chapter |
q | Adjustment → Chapter |
2 - | Door handle with base |
q | Removing and installing → Chapter |
3 - | Lock cylinder housing |
q | Removing → Chapter |
4 - | Protective cover |
5 - | Bolt |
q | 20 Nm |
6 - | Safety button |
q | Removing and installing → Chapter |
7 - | Safety rod |
8 - | Bolt |
q | 20 Nm |
9 - | Blanking plate |
10 - | Door lock |
q | Removing and installing → Chapter |
11 - | Bowden Cable |
12 - | Inside handle |
13 - | Bolt with internal splined head |
q | 20 Nm |
14 - | Sealing element |
15 - | Hook |
16 - | Door retainer |
q | Removing and fitting: → Chapter |
17 - | Cover |
18 - | Hexagonal bolt |
q | 9 Nm |
19 - | Bolt |
q | 7.2 Nm |
20 - | Abrasion protection |
21 - | Bolt |
q | Tighten to 20 Nm + 90º |
q | Always replace the bolt after loosening it |
22 - | Cover |
23 - | Prisoner bolt |
q | 23 Nm |
q | To detach door from hinge, simply unscrew bolt |
24 - | Door hinge |
25 - | Bolt with internal splined head |
q | M8 x 22 |
q | Fitted from the interior of the vehicle |
q | To loosen or tighten the bolt it is necessary to remove and fit the instrument panel → Instrument panel: Removal and fitting ; Rep. Gr.70 |
q | Tighten to 20 Nm + 90º |
q | Always replace the bolt after loosening it |
26 - | Bolt with splined head |
q | M8 x 28 |
q | Tighten to 20 Nm + 90º |
q | Always replace the bolt after loosening it |