seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Servicing injection part > < Simos injection and ignition system
Simos injection and ignition system
Simos injection and ignition system
Fitting locations overview
  • Activated charcoal filter
    • ◆ Location: in front right wheel housing
    • ◆ Activated charcoal filter system

=> Repair group 20; removing and installing parts of the fuel supply system; servicing activated charcoal filter system

  • Activated charcoal filter solenoid valve 1 (N80)
    • ◆ Activated charcoal filter system

=> Repair group 20; removing and installing parts of the fuel supply system; servicing activated charcoal filter system

  • Injector (N30...N33)
  • Fuel pressure regulator
 
N24-0260
  • 4 pin connector
    • ◆ For Lambda probe and Lambda probe heating
    • ◆ On vehicle underside
  • Ignition transformer (N152)
    • ◆ , item 15
  • Exhaust gas recirculation valve (N18)

=> Repair group 26; Exhaust gas recirculation system

  • Simos injection and ignition system control unit (J361)
    • ◆ Location: behind dash panel insert in passenger compartment
  • 3 pin connector
    • ◆ For knock sensor
    • ◆ Brown
  • Central connector
 
N24-0260
  • 3 pin connector
    • ◆ For engine speed sender
    • ◆ Black
  • Speedometer sender (G22)
  • Distributor with Hall sender (G40)
    • ◆ 
  • Engine speed sender (G28)
  • Coolant temperature sender (G62)
    • ◆ Black, with temperature gauge sender (G2)
  • Knock sensor 1 (G61)
    • ◆ => Page 28-3, item 8
  • Earth connection
 
N24-0260
  • Throttle valve control part (J338)
  • Air mass meter (G70)
  • Intake air temperature sender (G42)
  • Air cleaner

Servicing injection part > < Simos injection and ignition system