seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and refitting the dust and pollen filter > < Outer air turbine V2 : Removing and refitting

Leon Mk2

Outer air turbine V2 and base plate: separation
Outer air turbine -V2- and base plate: separation
–  Remove bolt -A-.
–  Take out the base plate -B- from the turbine.
  Note!
t  When fitting the outer air turbine on the base plate, make sure that connector -C- is in the proper assembly position.
t  After fitting the turbine, make sure that the heating is properly seated.
   

Removing and refitting the dust and pollen filter > < Outer air turbine V2 : Removing and refitting