Leon Mk2
| Heating: repair |
| (With front for middle and high range radio) |
Caution
|
Note!| t | Before disconnecting the battery, if the vehicle has a coded radio, the anti-theft coding should be consulted. |
| t | When the battery is reconnected, check the equipment of the vehicle (radio, clock, electrical window lifters) following the Repair and/or Instructions Manual. |
| 1 - | Diffuser for side window |
| q | Removing → Chapter |
| 2 - | Central diffusers |
| q | Removing → Anchor |
| 3 - | De-icer diffuser |
| q | Removing and refitting → Bodywork, interior assembly work; Rep. Gr.70 |
| 4 - | Heating air and cold air adjustment unit -E- 87-and -J255- |
| q | With re-circulation switch ON/OFF |
| q | With switch to increase and decrease fan speed and temperature |
| q | Removing and refitting → Anchor |
| q | Drive cables: fitting and adjustment → Chapter |
| 5 - | Intermediate part, central diffusers |
| q | Removing and refitting → Bodywork, interior assembly work; Rep. Gr.70 |
| q | Fitting position → Chapter |
| 6 - | Dust and pollen filter |
| q | With active carbon filter |
| q | Removing and refitting → Anchor |
| 7 - | Servomotor for cool/re-circulating air flap -V113- |
| q | Removing and refitting → Chapter |
| 8 - | Cool air fan -V2- |
| q | Removing → Anchor |
| 9 - | Additional resistance for cool air fan with overheating fuse -J126- |
| q | Removing → Item, cool air fan -V2-: removing and refitting |
| 10 - | Heating unit |
| q | Replacement: |
| – | Instrument panel: removing and refitting → Bodywork, interior assembly work; Rep. Gr.70 |
| – | Close the heat exchanger so that no cooling fluid is spilt |
| – | Heating unit: removing |
| q | Heating unit: disconnection and connection → Chapter |
| 11 - | Rim |
| q | With the diffusers in the foot rest position |
| q | Removing → Anchor |
| 12 - | Heat exchanger |
| q | Replacement: |
| q | First remove the instrument panel to take out the heating unit → Bodywork, interior assembly work; Rep. Gr.70 |
| q | Fitting: → Anchor; disconnecting and connecting the heating unit |
| q | After removal, all of the cooling fluid must be replaced |
| 13 - | Joint between heat exchanger/ dashboard |
| q | Note the fitting position → Anchor |
| 14 - | Intermediate part for de-icing |
| q | Replacement: |
| q | First remove the instrument panel to take out the heating unit → Bodywork - interior assembly work; Rep. Gr.70 |
| q | Note the fitting position → Chapter |
| 15 - | Cables for activating the central and de-icer traps |
| q | Fitting and adjustment → Chapter |
| 16 - | Air guide |
| 17 - | Servomotor for temperature flap -V68- |
| q | Check using -V.A.G 1551- |
| q | Removing and adjusting → Item → Basic adjustment - function- 04- |
