In the plenum chamber cover, to the right, pull upwards of the rubber gasket -1- until you reach the center of the vehicle.
–
Unlock the locking clips -arrows- of the plenum chamber cover and remove the cover -2-.
–
Pull the cover -1- in the direction indicated by the -arrows-, separate the clips -A- from the filter housing in the same direction -arrows- and remove upwards the filter cartridge with a mark.
–
Remove from the frame the filter cartridge.
Installation
–
Introduce right and left borders of the frame in the first plastic -arrows- of both sides of the new cartridge.
–
Introduce the clips of the frame -1- in their cooresponding seats of filter housing and press the frame with the cartridge downwards.
–
Mount the plenum chamber cover -2- and fit the locking clips -arrows-.