seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fresh air turbine control unit J126 and Fresh air turbine (01273-4124) V2 : removing and installing > < Air temperature sender, right foot well zone vent G262 : removing and installing

Leon Mk2

Dust and pollen filter: removing and fitting
Dust and pollen filter: removing and fitting
  Note!
t  Replacement interval for dust and pollen filter → Booklet1.
t  Clean the area around the dust and pollen filter in air conditioner (heating) shaft before fitting a new filter.
–  Remove the passenger side foot well cover → Bodywork, interior fitting work; Rep. Gr.68.
–  Cover the floor mat with paper in the area of the dust and pollen filter.
   
–  Remove the bolts -A- (not fitted in all vehicles, attaching the cover -B-, when inserts -D- are not used).
–  Move the cover -B- in -the direction of the arrow--C- and remove the cover.
  A87-0705
–  Remove the dust and pollen filter -A- from the opening -B- of the air conditioning (of the heating).
–  Clean the air conditioning (heating) by the opening -B- (for example using a vacuum cleaner) after the removal of the dust and pollen filter.
  A87-0706

Fresh air turbine control unit J126 and Fresh air turbine (01273-4124) V2 : removing and installing > < Air temperature sender, right foot well zone vent G262 : removing and installing