Leon Mk2
|
Note
|
1 - | Bracket for alternator and air conditioning / Climatronic control compressor |
Removing: |
– | Removing the alternator → Electrical system; Rep. gr.27 |
– | Remove the compressor from the support and fix it to the body with a suitable tool (e.g. soldering wire) → Fig.. |
– | Loosen the bolts that fix the bracket to the cylinder block. |
Installing: |
– | Replace fixing bolts. |
– | Tighten the hexagon head screws in the following sequence: -A, B, C, D, E, F-. |
2 - | Hexagon bolt M10x55 |
q | 50 Nm |
q | 6 units |
3 - | Air conditioning compressor (Climatronic) |
q | Removing: |
– | Remove the hexagon bolts → Item. |
– | Remove the compressor from the support and fix it to the body with a suitable tool (e.g. soldering wire) → Fig.. |
4 - | Hexagon bolt with washer |
q | M8X100 |
q | 25 Nm |
q | 3 units |
5 - | Dowel sleeves |
q | 2 units |
q | Make sure the cylinder head supports are correctly seated |
6 - | Tensioning device for Poly-V belt |
7 - | Tensioning element for the tensioning roller |
Note
|