seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Contact corrosion > < Working on refrigerant circuit

Leon Mk2

Paint work on vehicles with air conditioning system
Paint work on vehicles with air conditioning system
During paintwork repairs the object temperatures in the drying oven or in its preheating zone must not exceed 80°C.
Reasons:
Heat leads to high pressure in the system which may cause the system to burst.
Important information:
t  For the current flow diagrams applicable to the air conditioner, refer to → Current flow diagrams, Electrical fault finding and Fitting locations.
t  A label in the engine compartment indicates the capacity and the refrigerant used.
t  For further information on repair work for vehicles fitted with air conditioner and on handling refrigerant, refer to → Air conditioner with refrigerant R134a; Rep. gr.00.
   

Contact corrosion > < Working on refrigerant circuit