seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Air inlet opening with fresh air / air recirculation flap: removing and fitting > < Removing and installing heat exchanger

Leon Mk2

Removing and installing air distribution flap actuator
Removing and installing air distribution flap actuator
Removal:
–  Remove the vent from the foot well area on the left side.
–  Unclip flexible shaft from adapter for controls → Chapter.
   
–  Unscrew the bolts -1- and extract the air distribution flap control mechanism.
Installation
–  Arrows on gears must align.
  N80-10050
–  Position air distribution flap actuator and tighten bolts -1-.
  Note
Once fitting is finished, the operation of the air distribution flaps must be tested.
  N80-10050

Air inlet opening with fresh air / air recirculation flap: removing and fitting > < Removing and installing heat exchanger