seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Servomotor for de-icing flap V107 and servomotor for temperature flap V68 : removing and fitting|Fitting > < Servomotor for de-icing flap V107 and servomotor for temperature flap V68 : removing and fitting

Leon Mk2

Removing
Removing
–  Remove the glove box, the storage tray on the driver's side and the dashboard: → Bodywork, interior fitting work; Rep. Gr.70
  Note
t  To avoid damaging the exterior moulding of the dashboard, always leave it protected eg. with clean cardboard, on a clean workbench.
t  In right-hand drive vehicles, it is only possible to replace the servomotors if the air conditioning is removed (you do not need to remove the dashboard cross member). The air flow duct towards the air distribution housing is on the left hand side and the servomotors can only be removed after disconnecting the air distribution housing from the air conditioning ⇒ Servomotor -V70-: removing and installing.
–  Remove the dashboard cross member → Bodywork, interior fitting work; Rep. Gr.70
   
–  Release the connectors -A- from the servomotor -V107- and -B- from the servomotor -V68-.
–  Release the clips -C- and -D-.
–  Remove the support from the fixings -C- and remove it together with the servomotors -V68- and -V107-.
–  Detach the servomotor from the support → Chapter.
  Note
The servomotors -V68- and -V107- are different and thus their sprockets are different colours (black for servomotor -V68- and white for servomotor -V107-).
  E87-0143

Servomotor for de-icing flap V107 and servomotor for temperature flap V68 : removing and fitting|Fitting > < Servomotor for de-icing flap V107 and servomotor for temperature flap V68 : removing and fitting