seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fresh air turbine control unit J126 and Fresh air turbine V2 removing and fitting > < Air temperature sender, right foot well zone vent G262 : Removing and fitting

Leon Mk2

Dust and pollen filter: removing and fitting
Dust and pollen filter: removing and fitting
  Note
t  Replacement interval for dust and pollen filter → Booklet.
t  Clean around the dust and pollen filter in the air conditioning (heater) inlet before fitting a new filter.
–  Remove the passenger side foot well cover → Bodywork, interior fitting work; Rep. Gr.68.
–  Cover the floor mat with paper in the area of the dust and pollen filter.
   
–  Remove the bolts -A- (not fitted in all vehicles, they hold the cover -B-, when tabs -D- are not used).
–  Move the cover -B- in the direction of the arrow -C- and remove the cover.
  A87-0705
–  Remove the dust and pollen filter -A- from the cavity -B- of the climate control (heating).
–  Clean the climate control (heating) via the cavity -B- (eg. with a vacuum cleaner) after the removal of the dust and pollen filter.
  A87-0706

Fresh air turbine control unit J126 and Fresh air turbine V2 removing and fitting > < Air temperature sender, right foot well zone vent G262 : Removing and fitting