seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fresh air turbine control unit J126 and Fresh air turbine V2 removing and fitting|Fitting > < Fresh air turbine control unit J126 and Fresh air turbine V2 removing and fitting

Leon Mk2

Removing
Removing
–  Remove the glove compartment → Bodywork, interior fitting work; Rep. Gr.68.
–  Remove the passenger side foot well cover → Bodywork, interior fitting work; Rep. Gr.68.
   
–  Remove the bolt -A-.
–  Cut the cable ties fastening the cables to the fresh air turbine housing -C-
–  Release the block -B- and rotate the fresh air turbine housing -C- in -direction of the arrow-.
  Note
t  The join between the fresh air turbine housing -C- and the climate control system may be sealed with sealing paste, in which case it will be necessary to rotate the housing with more force.
  A87-0707
t  In the casing -C- the Fresh air turbine -V2- and the Fresh air turbine control unit -J126- are fitted and cannot be replaced separately → Parts catalogue.
  WARNING
The heat diffuser of the fresh air fan control unit -J126- can get very hot.
–  Remove the fresh air turbine housing -C- from the climate control.
  Caution
Do not touch the wheel of the outer air turbine -V2-; the use of force on the wheel or movement of the counteweights can cause imbalance which could lead to malfunction.
–  Detach the connector -D-.
  A87-0707

Fresh air turbine control unit J126 and Fresh air turbine V2 removing and fitting|Fitting > < Fresh air turbine control unit J126 and Fresh air turbine V2 removing and fitting