seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing > < Air conditioning components
Servomotor for air recirculation flapV113
Servomotor for air recirculation flap -V113-
  Note
t  Different variations of the servomotor for the air recirculation flap -V113- in vehicles with manual and automatic climate control → Parts catalogue The version for vehicles with manual climate control has, for example, a final switch and no potentiometer.
t  Different variations of the servomotor for the air recirculation flap -V113- in vehicles with automatic climate control with or without servomotor for dynamic pressure flap -V71- → Parts catalogue At the end of model year 2007 the servomotor for dynamic pressure flap -V71- will be gradually phased out; in vehicles without servomotor -V71-, the dynamic pressure flap (fresh air flap) is operated through a cam disk and a lever by the servomotor for the air recirculation flap -V113-. → Chapter
t  Operation of control motor can be checked in the following manner, for example: Connect the two pins “5” and “6” in the servomotor plug to a 12V DC voltage supply, the servomotor will move to the maximum position in only one direction, exchanging the positive and negative poles modifies the direction of turn. Use adapter cable for this purpose → Chapter.
t  Following the fitting of a new servo motor, carry out the basic setting of the climate control → Vehicle diagnosis, testing and information system VAS 5051.
t  With the function “basic adjustment” additional tests can be done for the activation of the electric components of climate control, for example, to ensure that they are not mixed up → Vehicle diagnosis, testing and information system VAS 5051.
   

Removing > < Air conditioning components