O-rings for refrigerant circuit |
t
| The O-rings may only be used once, replace them every time they are removed. |
t
| Lightly oil the O-rings with oil from the refrigerant circuit just before fitting. |
t
| Ensure that the O-rings sit correctly into the corresponding tubes or grooves. |
t
| Work in a clean area (even small impurities such as a hair for example can cause leaks). |
Note t
| Only fit O-rings that are resistant to the refrigeration agent R134a and to the corresponding oil. These O-rings are easily identified by their colour to avoid possible confusion (currently „red“, „purple“ or „violet“): → Spare parts catalogue. |
|
|
|