SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Main board for the heating controls: removing and fitting|Fitting >
< Main board for the heating controls: removing and fitting
Leon Mk2
Heating, ventilation, air conditioning system
Heating and air conditioning / Heating
Heating control : operation, removing and fitting / in_board_for_the_heating_controls_removing_and_fitting/">Main board for the heating controls: removing and fitting
Removing
Removing
Removing
–
Fit the rotating control for temperature selection
-A-
in the position “cold limit”.
–
Remove the glove compartment
→ Bodywork, interior fitting work; Rep. Gr.68
.
–
Remove the vent from the foot well area on the passenger side.
–
Replace the Heating control unit -J65-
→ Chapter
.
–
Release the flexible axle insert
-H-
–
Release the insert
-D-
for the Bowden cable sheath
-E-
and remove the Bowden cable sheath from the allotment.
–
Release the ball on the Bowden cable
-F-
from the operation lever
-G-
.
–
Remove the main board from the centre console.
Heating, ventilation, air conditioning system
Heating and air conditioning / Heating
Heating control : operation, removing and fitting / in_board_for_the_heating_controls_removing_and_fitting/">Main board for the heating controls: removing and fitting
Removing
Main board for the heating controls: removing and fitting|Fitting >
< Main board for the heating controls: removing and fitting