–
| Insert the flexible shaft -C- onto the main board -A-. |
–
| Fit the rotating control -D- into the position „foot well air distribution“ (as shown in the diagram). |
–
| Check the position of the flap in the area of the right hand side foot well -E-, the air duct -F- must be completely open. |
–
| If the air duct -F- is closed: |
–
| Release the flexible axle -C- from the main board -A-. |
–
| Turn the rotating control -D- to the position „air distribution to the windscreen“. |
–
| Insert the flexible shaft -C- onto the main board -A-. |
–
| Fit the rotating control -D- into the position „foot well air distribution“ (as shown in the diagram). |
–
| Check the position of the flap in the area of the right hand side foot well -E-, the air duct -F- must be completely open. |
The assembly is carried out in reverse order. |
|
|
|