Removing and installing cooling system parts |
Note! t
| When the engine is hot the cooling system is under pressure. If necessary, release pressure before commencing repair work. |
t
| Hose connections are secured with spring-type clips. In cases of repair only use spring-type clips. |
t
| To mount spring type clips use pliers -T20029-. |
t
| Coolant hoses should be stress-free when installing, so that they do not come into contact with other components (observe markings on coolant connection and hose). |
Perform cooling system leakage test with cooling system tester -SAT 1274- and adapters -V.A.G 1274/8- and -V.A.G 1274/9-. |
Cooling system components, bodywork side → Chapter. |
Cooling system components, engine side → Chapter. |
Notes on coolant mixture ratios → . |
|
|
|