SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Sealing flanges and engine flywheel: Removing and installing >
< Removing and installing toothed belt|Installation
Leon Mk2
Power unit
1,9 l SDi engine, mechanics
Enginecrankshaft group, pistons / Dismantling and assembling engine
Checking semi-automatic toothed belt tensioning roller
Checking semi-automatic toothed belt tensioning roller
Checking semi-automatic toothed belt tensioning roller
Test sequence
To carry out this operation, the toothed belt must be positioned and tensioned
–
Remove the upper protection. To do this, it is necessary to remove the securing clips and the expansion clip.
–
Check that the marks on the tensioning roller coincide.
–
Press the toothed belt firmly with thumb, the marks on the tensioner must move.
–
Stop putting pressure on the belt. The tensioning roller must return to its original position (the marks on the tensioner must coincide again).
Power unit
1,9 l SDi engine, mechanics
Enginecrankshaft group, pistons / Dismantling and assembling engine
Checking semi-automatic toothed belt tensioning roller
Sealing flanges and engine flywheel: Removing and installing >
< Removing and installing toothed belt|Installation