SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing intermediate shaft >
< Intermediate shaft oil seal: replacing|Removal
Leon Mk2
Power unit
1,9 l SDi engine, mechanics
Enginecrankshaft group, pistons
Sealing flanges and engine flywheel: Removing and installing / termediate_shaft_oil_seal_replacing/">Intermediate shaft oil seal: replacing
Installation
Installation
Installation
–
Fit the sealer holder cover (without oil seal) in the block.
–
Do not lubricate the sealing lip or the edge of the oil seal.
–
Fit oil seal over guide sleeve of the -T20081B/4- tool.
–
Fit the -T20081B/1- washer with a suitable bolt and screw it in until the oil seal is completely inserted.
Continue installing in reverse order
Power unit
1,9 l SDi engine, mechanics
Enginecrankshaft group, pistons
Sealing flanges and engine flywheel: Removing and installing / termediate_shaft_oil_seal_replacing/">Intermediate shaft oil seal: replacing
Installation
Removing and installing intermediate shaft >
< Intermediate shaft oil seal: replacing|Removal