seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Pressure plate: removing and installing|Installation > < Pressure plate: removing and installing

Leon Mk2

Removal
Removal
For replacing, it is first necessary to remove the gearbox
   
–  Remove flywheel securing bolts, immobilising with tool -T20075A-.
–  Remove the flywheel, along with the clutch plate.
  E30-0052
–  Remove circlip -A- of the clutch release plate from the holes -arrows- by levering with a screwdriver.
–  Remove the clutch release plate -B-.
  V30-0383
–  Remove the pressure asembly securing bolts using the -U-40009- tool.
–  Detach the pressure asembly and the safety plate.
  E30-0005

Pressure plate: removing and installing|Installation > < Pressure plate: removing and installing