–
| Dampen the new o ring -5- in coolant. |
–
| Fit the coolant pump -4- in the engine block and tighten the fixing bolts -3-. |
Note! The sealing stopper for the coolant pump points downwards. |
–
| Fit the return roller -2- and tighten the fixing bolt -1- (replace). |
| Torque: 40 Nm + 1/4 turn (90°) |
–
| Toothed belt, assembly, tensioning → Chapter. |
–
| Fit the upper and central protectors of the toothed belt → Chapter. |
|
|
|