Leon Mk2
Removing and installing fuel tank with its attachments |
1 - | Sealing cap |
q | Renew seal if damaged |
2 - | Securing screw |
3 - | Tank flap unit |
q | With rubber cup |
4 - | Gravity/overflow valve |
q | To remove valve unclip upwards out of support |
q | Check valve for through-flow valve vertical: open, valve tilted 45 °: closed |
5 - | O-Ring |
q | Renew |
6 - | Earth connection |
q | Check securely seated |
7 - | Connector |
q | For fuel gauge sender |
8 - | Union nut |
q | Remove and install with spanner -U-40055- |
9 - | Fuel gauge sender |
q | Note fitting position on fuel tank → Fig. |
10 - | Sealing ring |
q | Renew if damaged |
q | Coat with fuel when installing |
11 - | Spacer bush |
12 - | 15 Nm |
13 - | Fuel tank |
q | Removing and installing → Chapter |
14 - | 25 Nm |
15 - | Securing strap |
q | Note differing length |
16 - | Supply pipe |
q | To fuel filter → Item |
q | Black |
q | Clipped onto fuel tank |
q | Check securely seated |
q | To remove from flange press release button on connecting piece |
17 - | Return pipe |
q | From fuel filter → Item |
q | Blue or blue markings |
q | Clipped onto fuel tank |
q | Check securely seated |
q | To remove from flange press release button on connecting piece |
18 - | Vent valve |
q | To remove valve unclip out of side support |
q | Before installing remove sealing cap |
q | Checking → Fig. |
Note!
|