Leon Mk2
Intake manifold removing and fitting |
1 - | O-ring |
q | Replace if damaged or worn |
2 - | Throttle valve control unit -J338-* |
q | If replacing, the control unit must be adapted to the throttle valve control unit; adapting components → Chapter |
3 - | 10 Nm |
4 - | 20 Nm |
5 - | Intake manifold |
6 - | O-ring |
q | Renew |
q | Note the fitting position |
7 - | O-ring |
q | Replace if damaged or worn |
8 - | Intake manifold pressure sender -G71-* with intake air temperature sender -G42-* |
q | Intake manifold pressure sender -G71-: checking → Chapter |
9 - | 3 Nm |
q | Observe what is indicated in note → Fig. |