Leon Mk2
Cooling system components, coolant pump side |
1 - | O-ring or gasket |
q | Renew |
2 - | Coolant pump |
q | Check if it turns smoothly |
q | In case of fault or leak: complete renewal |
3 - | Rear toothed belt guard |
4 - | Camshaft pinion |
5 - | 20 Nm + 1/4 turn (90°) |
q | Renew |
6 - | 10 Nm |
q | Place with D6 |
7 - | Toothed belt |
q | Check the wear |
q | Do not twist |
q | Tighten the toothed belt → Chapter |
8 - | Toothed belt upper guard |
9 - | 10 Nm |
10 - | Toothed belt lower guard |
11 - | 20 Nm |
12 - | Tensioning roller |
q | Tighten the toothed belt → Chapter |