seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel supply, gas operation > < Removing

Leon Mk2

Installing
Installing
Installation is carried out in the reverse order, when doing this note the following:
–  Moisten new O-ring -2- with coolant.
–  Insert thermostat -1- into connecting flange -3- and turn 1/4 turn (90 °) to right.
–  Fit connecting flange -3- with thermostat -1- into engine block.
  Note!
The brace on the thermostat must be almost vertical.
   
–  Tighten securing bolts -4-. Tightening torque: 15 Nm
–  Filling with coolant → Chapter.
  A19-0042

Fuel supply, gas operation > < Removing