| Installation is carried out in the reverse order, when doing this note the following: |
| t
| Breather and fuel hoses are to be installed kink-free. |
| t
| Secure fuel hoses with spring-type clamps. |
| t
| Ensure fuel hoses are seated securely. |
| t
| Do not interchange supply and return hose (return hose blue or blue markings, supply hose black). |
Note! | After installing fuel gauge sender, check that the supply, return and breather pipes are still clipped onto the fuel tank. |
| –
| Carry out test drive and read fault memories of all control units again. |
|
|
|
