Leon Mk2
Intake manifold: dismantling and assembling |
1 - | Breather line |
q | It comes from the activated charcoal filter system solenoid valve: → Chapter |
2 - | Support |
q | Engines AUC, AUD |
3 - | Vacuum valve |
q | Engines AUC, AUD |
4 - | Vacuum hose |
q | Engines AUC, AUD |
q | It goes to throttle valve control part -J338- |
5 - | Screw |
q | 10 Nm |
6 - | Ventilation hose |
q | Engines AUC, AUD |
q | It comes from the opening of the oil deflector connection |
7 - | Throttle valve control part -J338-* |
q | Checking → Chapter |
q | If replaced match engine control unit → Chapter |
q | Connector contacts are gold-plated |
8 - | Oil seal |
q | Substitute |
9 - | Vacuum hose |
q | It comes from the fuel pressure regulator → Item |
10 - | Screw |
q | 20 Nm |
11 - | Intake manifold |
q | Removing and installing → Chapter, Injection system-components: removal and installation |
12 - | From brake servo |
13 - | Oil seal |
q | Substitute |
14 - | O-ring |
q | Renew if damaged |
15 - | Intake manifold pressure sender -G71-* with intake air temperature sender -G42-* |
q | Checking intake manifold pressure sender → Chapter |
q | Checking intake air temperature sender → Chapter |
q | Intake air temperature sender resistance values between contacts 1 and 2 → Fig. |
16 - | Screw |
q | 3 Nm |
17 - | Connection opening |