seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Seal bracket on the distribution side: removing and fitting|Fitting > < Seal bracket on the distribution side: removing and fitting

Leon Mk2

Removing
Removing
–  Remove the timing belt → Chapter.
   
–  Remove the crankshaft sprocket, immobilising it with the counterhold -T20018B-.
–  Remove oil sump → Chapter.
  E13-10019
–  Extract bolts -1... 6-fixing the front sealing flange.
–  Remove sealing flange. If necessary, loosen by giving light taps with a rubber hammer.
–  Eliminate the sealant residue, using a flat rasp.
  A13-0355
–  Remove sealant remaining on sealing flange with rotating plastic brush (wear eye protection).
–  Clean sealing surface; must be free of oil and grease.
  A17-0030

Seal bracket on the distribution side: removing and fitting|Fitting > < Seal bracket on the distribution side: removing and fitting