seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Draining off and filling coolant > < Air duct with coolant fanV7 and coolant fan 2V177: Removing and installing

Leon Mk2

Removing and installing radiator
Removing and installing radiator
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
   
Special tools and workshop equipment required
t  Refractometer -T10007A-, see equivalent → Anchor
t  Torque wrench -VAG 1331-, see equivalent → Anchor.
t  Base -VAS 6340-, see equivalent → Anchor

Removal:
–  Place the lock carrier plate into service position → Bodywork, exterior fitting work; Rep. gr.50
–  Drain coolant → Chapter.
–  Pull coolant hoses off radiator.
–  Pull off connector for radiator fan.
–  Remove cowling together with fans → Chapter.
–  Remove radiator securing bolts → Item and remove radiator upwards.
Installation
Installation is carried out in reverse order, noting the following:
–  Fill up with coolant → Chapter.
   

Draining off and filling coolant > < Air duct with coolant fanV7 and coolant fan 2V177: Removing and installing