–
| Place the Drip tray -VAS 6208- under the separation area. |
–
| Release hose clip -1- and detach coolant hose. |
–
| Place the used oil collection and extraction unit -SAT 1100- below engine. |
–
| Unscrew bolts -arrows- and remove oil filter bracket with engine oil cooler. |
Installation is carried out in reverse order, noting the following: |
Note t
| Renew gaskets, seals and O-rings. |
t
| Hose connections and air pipes and hoses must be free from oil and grease before fitting. |
–
| Install oil filter element, replenish engine oil and check oil level → Chapter. |
–
| Replenish coolant in cooling system, change coolant if engine oil cooler has been renewed → Chapter. |
|
|
|