Leon Mk2
| Radiator and radiator fan: component overview |
| 1 - | Radiator |
| q | removing and fitting → Chapter |
| q | Following the replacement, renew the coolant |
| 2 - | Spring-type clip |
| q | Removing and installing with the pliers -VAS 6340- |
| 3 - | Upper coolant hose |
| q | Coolant hose schematic diagram → Chapter. |
| 4 - | Cowling |
| q | removing and fitting → Chapter |
| 5 - | Cap |
| q | Check using the cooling system tester -VAG 1274B- and the adaptor -VAG 1274/9- |
| 6 - | 5 Nm |
| 7 - | Expansion tank |
| q | Check using the cooling system tester -VAG 1274B- and the adaptor -VAG 1274/8- |
| 8 - | Radiator fan 2 -V177- |
| q | removing and fitting → Chapter |
| 9 - | Radiator fan -V7- |
| q | with radiator fan control unit -J293- |
| q | removing and fitting → Chapter |
| 10 - | Bracket |
| q | For connector |
| 11 - | Lower coolant hose |
| q | To connection sleeve on the thermostat |
| q | Coolant hose schematic diagram → Chapter. |
| 12 - | Spring-type clip |
| q | Removing and installing with the pliers -VAS 6340- |
| 13 - | Retaining clip |
| 14 - | Radiator outlet coolant temperature sender -G83- |
| q | removing and fitting → Chapter |
| 15 - | 5 Nm |
