Leon Mk2
| Part II |
| 1 - | 40 Nm + 1/2 turn (180°) further |
| q | Replace |
| q | removing and fitting → Chapter |
| 2 - | Engine carrier |
| q | removing and fitting → Chapter |
| 3 - | 5 Nm |
| 4 - | Protective plate |
| 5 - | Upper protection element for the notched belt |
| 6 - | Notched belt guard - lower part |
| 7 - | Belt pulley and vibration damper |
| q | The pressure plate can only be installed in one position. Holes are off-set. |
| 8 - | 10 Nm + 1/4 turn (90°) further |
| q | Replace |
| 9 - | 10 Nm |
| q | Replace |
