Leon Mk2
Fuel filter: Repairs |
1 - | Return pipe |
q | Coming from the tandem pump |
q | Blue colour or blue mark |
q | Check for secure seating. |
2 - | Supply pipe |
3 - | Retaining clip |
4 - | Regulation valve |
q | Installation position: Arrow to the fuel tank |
q | To change the filter, release the attachment hook and remove the regulation valve with the fuel lines connected |
q | Min. +15 °C: Step towards open filter |
q | Min. +31 ?: Step towards closed filter |
5 - | Return pipe |
q | To fuel radiator → Chapter |
q | Check for secure seating. |
q | Blue colour or blue mark |
6 - | Supply pipe |
q | From the fuel tank → Item |
q | White or white mark |
q | Check for secure seating. |
7 - | Fuel filter: |
q | Fill with fuel before fitting |
q | The flow direction is marked by arrows |
q | Do not interchange the connections |
q | If this is damaged, replace it |
8 - | Seal |
q | If this is damaged, replace it |
9 - | Water purge bolt |
q | To purge water, release the attachment hook from the regulation valve and remove the valve with the fuel lines connected |
q | Loosen and let about 100 cm³ of liquid flow out |
10 - | 25 Nm |
11 - | Retainer |
12 - | Cartridge |