Leon Mk2
Ignition system - exploded view |
1 - | Knock sensor 1 -G61- and knock sensor 2 -G66- |
q | Gold plated contacts |
2 - | Ignition coil with output stage |
q | Ignition coil 1 with output stage -N70- |
q | Ignition coil 2 with output stage -N127- |
q | Ignition coil 3 with output stage -N291- |
q | Ignition coil 4 with output stage -N292- |
q | removing and fitting → Chapter |
3 - | Spark plug |
q | 25 Nm |
q | Remove and install with the wrench -3122B-, see equivalent → Anchor |
4 - | Bolt. |
q | 20 Nm |
q | Tightening torque influences the function of the knock sensors |
5 - | Bolt. |
q | 10 Nm |
6 - | Hall sender -G40- |
q | Gold plated contacts |
7 - | O ring |
q | If this is damaged, replace it |