Leon Mk2
Intake manifold - Assembly overview |
1 - | Intake manifold |
2 - | Seal |
q | Replace. |
3 - | 7 Nm |
4 - | Throttle valve control mechanism -J338- |
q | Clean → Chapter |
q | When replacing, erase adaptive values and adapt the engine control unit to the throttle control unit → Vehicle diagnosis, testing and information system VAS 5051“Guided function” |
5 - | 20 Nm |
6 - | Flexible tube |
q | To the brake servo |
7 - | O-ring |
q | Replace. |
8 - | Coolant hose |
q | For engine block ventilation preheater |
9 - | Spring type clip |
q | Remove and fit with the hose clip pliers -VAS 6340- or the spring-type clip pliers -VAS 6499- |
10 - | For engine block ventilation heater |
q | To remove and install, remove the intake manifold |
11 - | 3 Nm |
12 - | Flexible tube |
q | Leads to oil trap with heated vacuum valve |
13 - | Intake manifold pressure gauge sensor -G71- with air intake temperature sensor -G42- |
q | Secured to the intake manifold using a clip |