–
| Unscrew securing bolts -arrows- for vacuum unit and remove vacuum unit from turbocharger. |
Installation is carried out in the reverse order. When installing, note the following: |
t
| Linkage must be adjusted after installing vacuum unit → Chapter. |
t
| Specified torque for vacuum unit to turbocharger: 10 Nm |
t
| Renew seals, gaskets and self-locking nuts. |
t
| Hose connections and hoses for charge air system must be free of oil and grease before assembly. |
t
| Secure all hose connections with the correct type of hose clips (same as original equipment). |
|
|
|