Leon Mk2
Parts of cooling system - body side, engine code AJH |
1 - | Rubber grommet |
2 - | Upper coolant hose |
q | Check for secure seating. |
q | Coolant hose schematic diagram → Chapter. |
3 - | Radiator |
q | Removing and installing → Chapter. |
q | After renewing, renew entire coolant. |
4 - | Radiator fan thermal switch -F18-, 0.35 Nm |
q | For electric fan. |
q | Switching temperatures: |
1st stage on 92...97 °C, off 84...91 °C |
2nd stage on 99...105 °C, off 91...98 °C |
5 - | Connector |
q | Black, 3-pin |
q | For thermal switch for radiator fan. |
6 - | 10 Nm |
7 - | Reinforcement strut |
8 - | Connector |
q | Black. |
q | For right radiator fan -V35-. |
9 - | Securing clip |
q | Check for secure seating. |
10 - | Right radiator fan -V35- |
q | Removing and installing → Chapter. |
11 - | Fan ring |
12 - | Rubber grommet |
13 - | Washer |
14 - | Rubber washer |
15 - | Sleeve |
16 - | Connector |
q | Black. |
q | For left radiator fan -V7-. |
17 - | Left radiator fan -V7- |
q | Removing and installing → Chapter. |
18 - | Securing clip |
q | For lower coolant hose. |
19 - | Lower coolant hose |
q | Check for secure seating. |
q | Coolant hose schematic diagram → Chapter. |
20 - | Cowling |
21 - | Rubber bush |